Control and Shift Solenoids Replacement

Removal Procedure

1.      Remove the transmission oil pan and filter.

Important: Do not remove the valve body for the following procedures. Removal of the 1-2 accumulator is necessary only if servicing the pressure control solenoid.

2.      Remove the 1-2 accumulator if necessary.

3.      Disconnect the internal wiring harness electrical connectors from the following components:

4. 

5. 

6. 

7. 

8. 

9.       

10.   

11.  Remove the pressure control solenoid retainer.

12.  Remove the pressure control solenoid.

13.   

14.  Remove the 1-2 and 2-3 shift solenoid retainers.

15.  Remove the 1-2 and 2-3 shift solenoids.

16.   

17.  Remove the 3-2 control solenoid retainer.

18.  Remove the 3-2 control solenoid.